N Range Hoist

Our cable hoists with a two-speed lifting motor are supplied with the proven experience of thousands of pieces of equipment installed in recent years. Its main strengths are:

Capacity: 1 to 100 T. 

Span: 1 to 30 m.

Work Group: M4 to M6

• Dual winding motor brake with a short circuit rotor and IP 55 protection as well as other protections available on request.
• Instantaneously triggered electromagnetic brake in case of power failure.
• Elevation reducing gear of our own design comprised of gears mounted on bearings that turn continuously in an oil bath in a hermetically sealed cabinet.
• Completely mechanised laminated steel drum, following the current FEM regulations.
• Cable-Guide: Nodular casting, breakage and wear resistant. Consists of two pieces, which makes it easy to assemble. A spring is attached to the cable-guide which maintains tension during load elevating and lowering operations.
• Load Limiter: With a snap action switch that complies with the machinery safety directive.
• Load Block and Hook: Made from forged alloyed steel and suspended from a cross piece made from the same material, it is mounted on an axial bearing and contains a safety latch that prevents slings from being released.
• Limit Switch: Operated by the cable-guide, it limits hook movement in extreme positions.

This product has been assigned by the exhibitor to category:
CRANES AND HANDLING / Trolleys and hoists

This product is presented by the exhibitor: JASO INDUSTRIAL